Drills, grinders, cutters and rotary tools assembled from machined components and tested under load before they leave the factory.
Category 02
Power tools fail in predictable ways: overheated gearboxes, worn bearings, damaged switches and cracked housings. Our assembly and run-testing stages address each of these before the tool is packed.
Housings, gear sets, chucks and spindles are machined in-house. Electrical assemblies are fitted, checked for correct wiring and run under load. Specifications shown on this page are sample data.
Gearbox
Metal housing with CNC-machined gear set (sample)
Motor
Copper wound, run-tested under load (sample)
Testing
No-load and load run check before packing
Packing
Individual carton, moulded tray or bulk export carton
01 — Drill machines
Metal gearbox housings, keyed chucks and mode selectors built for repetitive production and service work.
Drills
Variable speed, metal gearbox, keyed three-jaw chuck and an auxiliary side handle for high-torque drilling.
Drills
Two-speed driver with an adjustable clutch and a compact body for tight assembly work.
Drills
Hammer action with a three-function selector for drilling, impact drilling and driving.
02 — Grinders
Cast gear heads and spindle arrangements selected for stability under load rather than for headline speed figures.
Grinders
Cast gear head with a spindle lock for fast disc changes and a guard sized for fabrication work.
Grinders
Straight hand grinder for detail work, with a knurled collet for secure bit retention.
Grinders
Eye shields and adjustable tool rests for accurate, repeatable work on both wheels.
03 — Cutters
Cold cutting and abrasive cutting equipment, selected for square cuts and repeatable results batch to batch.
Cutters
Cold cutting tool to sever steel rod, bar and tube with minimal deformation and a clean cut face.
Cutters
Abrasive cut-off machine with a workpiece clamp for square, repeatable cuts on section and pipe.
04 — Rotary tools
Variable-speed rotary tools for deburring, engraving, sanding and precision finishing, supplied with a collet set, depth stop and an accessory case.
Rotary tools
Variable speed from 5000 to 22000 rpm with a collet set, depth stop and accessory case.
| Product code | WM-PT-2004 (sample) |
|---|---|
| Rated power | 850 W, 0 to 3000 rpm (sample) |
| Chuck capacity | 13 mm keyed three-jaw (sample) |
| Housing | Cast aluminium gearbox (sample) |
| Switch | Trigger with forward / reverse (sample) |
| Standard equipment | Side handle, depth stop, carry case |
| Application | Drilling in steel, wood and plastics |
| Certification | Add certification details here |
Sample specification shown for layout purposes. Replace with your own data sheet.
Technical
Power tool specifications include the electrical and mechanical data your customers and inspectors need, plus the standard equipment supplied in the box.
Power tools
Voltage options, plug types, packaging and accessory kits are configurable. Send your target market and we will propose a range.